Romilly's HART® and Fieldbus Message Board


[ Follow Ups ] [ Post Followup ] [ Back to top of Message Board ]

Re: Re: Re: Can master rev.5 read PV from device rev.7?

Message posted by Romilly ( : 208.114.116.122) on 06 October 2011 at 14:57:49.

in reply to: Re: Re: Can master rev.5 read PV from device rev.7? posted by Jacek on 26 September 2011 at 12:02:25.

There is no problem building the unique ID from rev. 7 devices. The two bytes Expanded Device Type (bytes 1 - 2 in the rev. 7 command 0 reply) are what the host uses to construct the long address. Just the same bytes as in rev. 5. The new 2-byte Manufacturer ID (bytes 17 - 18) is not used for this. HCF will issue unique 2-byte expanded device type codes for each field device.



Follow Ups:




Post a Followup

Name:
E-Mail:

Subject: Re: Re: Re: Re: Can master rev.5 read PV from device rev.7?

Comments:


[ Follow Ups ] [ Post Followup ] [ Back to top of Message Board ]