in reply to: Re: HyperTerminal to HART device posted by Romilly on 15 January 2007 at 14:25:35.
Than you for your sources. Thats quiet a lot of information there. I already did the setting to the hyperterm with hardware(rts) swtich on. But still not get any response.
I'm using a protocol analyzer to observe the signal between my HART device to the HART modem software. So I actually already know the unique id to used with the command #3. Also from the analyzer, the RTS signal is only set to 1 when sending command. Are there any method so that I can control the RTS because the hyperterm hold the rts all the time?